BOND SBR Latex

About BOND SBR Latex

USESMost common uses of CETEX BOND are bonding of old concrete to new concrete / mortar, patching, resurfacing, spray and fill coats, precast, repairing, building panels & beams, industrial flooring, highway and bridge deck repairs, waterproofing, etc. ADVANTAGESSuitable for various surfaces like concrete, mortar ,plywood, cements board, gypsum, tile or stone.The stickiness / tackiness are long lasting if protected from moisture, dust, dirt, etc.Improved bonding between surfaces increases the durability of construction.Improves tensile, flexural properties and abrasion resistance.Excellent weather-ability. It can be used on exterior as well as interior surfaces.It aides in water proofing and improves resistance to chemicals of the surface.It can be white dyed so that one can make out the unapplied surfaces.It is water- based, very low VOC. It is eco-friendly.Will not yellow, discolour. It is UV stable.Non-flammable. Non-toxic. Low odor. PROPERTIESType: SBR EmulsionColor: Milky White Specific Gravity: 1.05 +/- 0.02 at25CSolid Content: 50%w/w approx.DIRECTION OF USE All loose and damaged surfaces should be thoroughly rectified. Surface should be free from dust, grease, coatings like curing compounds, etc. As Bonding Agent. It can be applied directly on the surface or. Coverage 5 sq. mtr./kg (diluted). As Patching, repair mortar, screed or bonding mortar for tiles, bricks. 10-15 kg of diluted BOND ( ratio1: 1) is added to a mortar mix. The wet mix should be sticky. After application, finish the surface to the desired texture with only cement Surface should be properly cured to ensure better quality and durability.PACKINGCETEXBOND is available in 20, 50, 210 kg pack. Other pack sizes are available on request. STORAGE Store in frost-free condition, away from sunlight or extreme heat. For best result, use within one year.