Concrete Liquid Sealer

About Concrete Liquid Sealer

CETEX LS is the mixture of small molecules of silane and siloxane, which forms micro-emulsion when mixed with water. It is safer, faster and easier to apply. Treated surfaces resist liquid penetration with out significantly reducing breath-ability of the surface. MECHANISMOn application of diluted solution, it reacts with air to form active resins in pores, which prevent penetration of liquid. ADVANTAGES Can be diluted in water up to 10-20times. Can be applied on coated or uncoated surfaces. Provides water repellency within 24hours. Treated surface is breathable. It is UV stable. VOC content is nil, helps earning LEED points as green building. Reduces maintenance, and prevents steel corrosion. Will not yellow, discolour, peel or flake. Non-flammable. Non-toxic. Low odor. It cures quickly and is economical to use. PROPERTIES Type 100% Silane / siloxane Color Reddish Orange Specific Gravity 1.06 +/- 0.02 at 25oC Dilutent Clean soft water COVERAGEDiluted solution can be covered over 150 sq. ft/litre (approx.). However, field trials should be conducted to determine the optimum dilution and coverage to achieve the required result. DIRECTION OF USE Dilute at least 10-20 times with soft water only. Take trial of small quantity to finalise the dilutionratio. Apply by brush, spray or by flooding the surface. Use the diluted mixture within 72 hours. Do not wash the surface for 24 hours after application. Wipe out splashes, if any, by soap water or organic solvent. PACKINGCETEX-LSis available in 25kgpack. Other pack sizes available on request. STORAGE Store in frost-free condition away from sunlight or extreme heat. For best result, use within one year.